GSGC24A

The GSGC24A is a simplified version of the GSGC25. It offers only 1 G722/ G711 Codec and is therefore much easier for non technically minded people to operate.

Ø      SIZE ONLY 145 x 204 x 80 mm (wxdxh)

Ø      BATTERY OPERATED FROM 2 ‘D’ CELLS

Ø      One G722/ G711 Codec

Ø      INBUILT TERMINAL ADAPTER

Ø      VERY EASY TO OPERATE

Ø      USES PROVEN ISDN TECHNOLOGY

Ø      +12v PHANTOM POWER

VIEW OF GSGC24A

 The GSGC24A has an inbuilt three channel mixer, each of the channels are mic/ line switchable and have +12v phantom power available. Each of these channels has a gain control, large on/off pushbuttons & an on indicating LED. The mixed output of these channels are fed through a compressor/ limiter and are sent to the Codec, this output is also on a rear panel phono socket. There is a 7 LED PPM for indication of the mixer output level.

One internal headphone amplifier is provided, with the output in parrallel on 2 front panel A or B guage jack sockets. Two front panel pots control the level to the headphone amplifier of the output of the mixer and the return cue from the Codec.

 A record output (on a rear panel phono socket) is a mix of the output of the GSGC24A’s mixer and the return programme cue line.

A cue output (the return audio from the codec) is available on a rear panel phono socket.

For ISDN line dialling, answering and Codec set up functions a front panel keypad is provided. The G722/ G711 Codec has a large green LED to show when Codec lock is O.K. and also a large red LED to show when an ISDN line is open.

 The GSGC24A can be powered from 2 ‘D’ cells (approximate battery life of 4 hours) or an external plug top psu. If it is being powered from the external supply and the supply fails the batteries will automatically take over. A front panel LED shows when the GSGC25 is switched on and flashes to indicate when battery level is low.

GSGC24A with optional Polycarbonate lid

Links to Other ISDN Pages

GSGC5       GSGC6      GSGC8     GSGC9    GSGC17  GSGC25  GS3U-057    TX RESERVE