GS-PPM003 REMOTE METERING OVER IP

This new system provides an easy to use way of remotely monitoring audio levels.
It is a 2 part system having a hardware audio input subrack where you connect the audio that you wish to monitor, this subrack also connects to your IP network. Elsewhere on your IP network you have the 2nd part which is pc software that receives the audio level data from your IP network and turns it into a graphical interface of a needle or LED PPM.

 

        HARDWARE


Rear View of GS-PPM003

*       Mains powered (100 – 250 Volts) 19Inch 1RU subrack

*       Up to 6 Stereo audio input cards (Stereo inputs can be split to dual mono in the software)

*       Input cards can be either analogue or digital (please specify when ordering (a mixture of both is OK))

*       Digital inputs are AES3 and can work between 16 & 108K sampling.

*       Audio input cards can be fitted individually (i.e. a rack can be supplied with 1,2,3,4,5 or 6 stereo input cards)

*       LEDs indicates correct operation of each input card

*       RS232 & ETHERNET outputs

*       IP address can be set by a DHCP server (default), or it can be fixed to a static address.

*       64 Users can connect to the Ethernet interface at the same time

*       6 stereo inputs produce a payload of 320 bytes per second per user connected across the network

 

        SOFTWARE

*       NO LICENCE FEE! Software can be installed and used on as many computers as you want

*       2 Programs supplied

*       1 Program allows set up of the hardware, i.e. naming of the rack itself this is called the NETWORK PPM MANAGER....more details

*       2nd Program allows users to open meters on their screen NETWORK PPM DISPLAY.....more details

*       Up to 64 computers can connect at any one time to the same hardware (via Ethernet)

*       Complete simple to use PC software package

*       Active X modules for individual meters & system components are included for use in customers own bespoke software

*       PC software allows naming, sizing & positioning of meters on desktop

*       Meters can display A/B, M & S, S +20dB. Both M-3 and M-6 Mono specification are supported.

*      Description, Location and Contact details can be set for each sub-rack.

*      New sub-racks added to the network are automatically found and added to the list of available sub-racks by the software.

*      Channels can be individually named and re-ordered in software.


GS-PPM003 MANUAL